Tag Archive for: selfie

Ultimate Bike Selfie

/in , , /by

We recently saw an amazing picture of a rider on a mountain bike trail in the UK. The photo was a selfie taken by the rider, James Vincent. He used a remote camera set up that was enabled by PocketWizard. I reached out to James to see if he could share how he set it up. 

The Bike Selfie – Born of Necessity

As well as getting paid to take photos of other mountain bikers, I spend a lot of my time testing bikes and kits for Singletrack Magazine and it’s pretty unfair to ask your riding buddies with regular jobs to sacrifice their precious weekend rides to muck around taking photos of various test kits. My need to take bike selfies is born out of necessity rather than some vain egotistical desire, or at least that’s what I tell myself anyway.

Don’t Use Cheap Triggers (You Might Crash)

This is actually the second remote trigger setup I’ve developed. Initially, I tried using cheap triggers, but they weren’t latching, and when you’re dropping in to a steep chute or jump, the last thing you want to be thinking about is moving your thumb to an awkward position and pressing a button repeatedly to get the shot.

Use the Right PocketWizard Cable

PocketWizard BT1/BT3 Cable

Fortunately, the PocketWizard Plus III has an input for an external trigger cable and using a button trigger cable (BT1 or BT3) with a little bit of tape to lock it “on”, I could send a continuous signal to the receiver unit that’s hooked up to the camera so that I was free to focus on riding the section cleanly.

 

The Selfie Set-up

You will need 2 PocketWizard radios set to the same channel. Put one on your camera and mount the other on your bike. Pop your camera on your trusty tripod of choice and frame the shot, then set your focus on the feature before switching the camera to manual focus mode (the last thing you’ll want after all this is to miss focus). Get in place and when you are ready, press the remote trigger, lock it down with the tape, and get your hands back to a comfortable position just before you drop into the feature. Once you hit the jump and clear the section, remove the tape.  Simples.

Use Relay Mode to Pop a Flash in your Selfie

Want to pop a flash? You will need a third PocketWizard radio attached to your flash with a flash sync cable. This Channel needs to be set 1 Channel higher than the other 2 radios in order to work. This is called Relay Mode.

PocketWizard Cable Inspiration

Inspired?  Our Button Trigger cable is just one of the specialty cables we offer to help you pull off your own epic selfie.

 

PocketWizard Auto-Relay

/in , , , /by

Selfies Using Remote DSLR Camera and Remote Flash

Getting together with family and friends this holiday weekend?  Get yourself in the photo using PocketWizards set up for Auto-Relay.

At PhotoPlus Expo in NYC this past October, we hosted an informal photowalk where we showed participants how to set up a selfie using a remote DSLR camera and an off-camera flash using Auto-Relay. Our location was on the High Line, a former elevated train line that has been converted into an elevated walkway, green space and park.

Auto Relay Set Up – Three PocketWizard Radios

PocketWizard Sales and Support Team

In order to take this selfie, we held a PocketWizard Plus III in our hand and used it to trigger our camera in sync with an off-camera flash. This is called Auto-Relay and it requires three PocketWizard radios. Auto-Relay is the only situation where not all PocketWizard radios are set to the same Channel.

  1. We set the transmitting PocketWizard Plus III radio in our hand to Tx only and set it to a desired Channel and Zone.
  2. We set the relaying Plus III for our remote camera to the same Channel and Zone and set the triggering mode to TxRx. We put this radio on our camera’s hot shoe and connected it to the camera with the remote camera cable.
  3. We connected our remote flash with a sync cable to our third PocketWizard Plus III set to Rx Only. We set the Zone on this radio the same as the other radios, but we set the Channel one higher than the other PocketWizard radios. (If we had them all on the same Channel, the timing of the flash would fire before the camera and miss the shot.) We could have used multiple lights – they would all need their own PocketWizard all set up the same.
  4. Making sure all our radios were set to the same Zone, we took our places then pressed the TEST button on the PocketWizard in our hand to take the shot and the magic happened seamlessly.
  5. To capture the best city lights, we used a somewhat slower shutter speed to let in as much of the ambient light as possible.

Settings:
ISO 1250
Aperture: F4.0
Shutter Speed: ¼ sec

For more information, check our our Wiki. Note that Auto-Relay can be accomplished with our other PocketWizard radios in the same manner.

Try it and tag us with #pocketwizardselfie!